8bitfiles.net/archives

home *** CD-ROM | disk | FTP | other *** search

/ 8bitfiles.net/archives / archives.tar / archives / compuserve-file-archive / 13 C128 Telecom / VT100D.SDA / VT100-128.MAN next >

Wrap

Text File | 2019-04-13 | 50.7 KB | 1,189 lines

╓╘100 ┼═╒╠┴╘╧╥ FOR THE ├128 BY ╩OE ╧'╚ARA ├OPYRIGHT (├) 1985,1988 BY ═ICROTECHNIC ╙OLUTIONS, ╔NC. AND ├OMMODORE ┬USINESS ═ACHINES, ╔NC. ┴LL ╥IGHTS ╥ESERVED ╓ERSION 2.1 BY ╞RED ┬OWEN ô ╓╘100-128 VERSION 2.1 ├OMMAND ╦EY ╙UMMARY ----------------------------------------------------------------STATUS LINE [ALT] ┴ ═ODEM COMMAND MODE (─IAL/┴NSWER) [ALT] ┬ ╘OGGLE ┬UFFER ┬ [ALT] ├ ├APTURE ╙CREEN TO ┬UFFER [ALT] ─ ─UMP ┬UFFER [ALT] ┼ ┼RASE SCREEN [ALT] ╞ ╠OAD FILE INTO BUFFER [ALT] ╔ ╘OGGLE INTERCHARACTER DELAYS [ALT] ╩ ╙ET CLOCK (╚╚══) [ALT] ╦ ╞UNCTION ╦EY DEFINITION [ALT] ╠ ╠INEFEED TOGGLE ╠ [ALT] ═ ═ODEM SETTINGS [ALT] ╬ ╠OAD NEW ╧PTIONS [ALT] ╧ ╙AVE CURRENT ╧PTIONS [ALT] ╨ ╨RINTER TOGGLE ╨ [ALT] ╤ ╥EPEAT KEYS ╧╬ [ALT] ╥ ╥EPEAT KEYS ╧╞╞ [ALT] ╙ ╙CREEN DUMP TO PRINTER [ALT] ╘ ╨RINT/─ISPLAY DISK FILE [ALT] ╒ ╒PLOAD SEQUENTIAL DISK FILE [ALT] ╓ ╙CREEN BACKGROUND TOGGLE [ALT] ╫ ─ISK COMMAND, DIRECTORY [ALT] ╪ ╪═╧─┼═ TRANSFER ( ╘ ) [ALT] ┌ ┼XIT PROGRAM [ALT] + ╞LOW ├ONTROL ╧╬ [ALT] - ╞LOW ├ONTROL ╧╞╞ [ALT] * ═ODIFY ┴╙├╔╔ TABLES [ALT] / ─ISPLAY PROGRAM VERSION [ALT] <DEL> ├HANGE ─┼╠ETE CHARACTER [ALT] <RETURN> ╘OGGLE <CR><LF> / <CR>ONLY ╥ [ALT] <BACKARROW> ═AKE BACKUP [ALT] <┼NGLISH POUND> ╘OGGLE AUTOWRAP ╫ [ALT] <UPARROW> ╥ECOVER BUFFER [ALT] <CURSOR UP/DWN> ├URSOR TYPE [ALT] <ENTER> ╥ESET PROGRAM (PRESERVES BUFFER) [├=] ╧ ╓IEW/├HANGE CURRENT OPTIONS [├=] <ESC> ┼NABLE/DISABLE GRAPHICS [STOP] ┼XITS ALL MODES, SPLIT SCREEN, ETC. [HELP] ╚ELP ╙CREENS (1 THROUGH 4) [LINEFEED] ┬╥┼┴╦ KEY [NO SCROLL] ╪╧╬/╪╧╞╞ TOGGLE (├╘╥╠-╙ AND ├╘╥╠-╤) ╪ ô ╓╘100-128 VERSION 2.1 ╦EYBOARD CONVENTIONS ---------------------------------------------------------------- ╨RESS ╘O TRANSMIT ------------------ -------------------------------- <┼NGLISH POUND> \ (┴╙├╔╔ $5├) (BACKSLASH) <UPARROW> ^ (┴╙├╔╔ $5┼) (CARET) <BACKARROW> _ (┴╙├╔╔ $5╞) (UNDERSCORE) [SHIFT] * ' (┴╙├╔╔ $60) (BACKTICK) [SHIFT] + { (┴╙├╔╔ $7┬) (LEFT CURLY BRACE) [SHIFT] <┼. POUND> | (┴╙├╔╔ $7├) (VERTICAL BAR) [SHIFT] - } (┴╙├╔╔ $7─) (RIGHT CURLY BRACE) [SHIFT] <UPARROW> ~ (┴╙├╔╔ $7┼) (TILDA) [├=] <┼. POUND> ^╘ (┴╙├╔╔ $14) (CONTROL-╘) [CTRL] <┼. POUND> ^\ (┴╙├╔╔ $1├) (CONTROL-BACKSLASH) [CTRL] <UPARROW> ^^ (┴╙├╔╔ $1┼) (CONTROL-CARET) [CTRL] = ^_ (┴╙├╔╔ $1╞) (CONTROL-UNDERSCORE) ╬OTES: ╙EE THE [├=]<DELETE> COMMAND FOR IMPLEMENTATION OF ─┼╠ KEY, WHICH CAN SERVE AS EITHER ┬╙ (^╚) OR ─┼╠ (┴╙├╔╔ $7╞). ╘HE USER MAY CHANGE MOST KEYCODES (TRANSMISSION) AND DISPLAY CODES (RECEPTION). ╘HESE MODIFICATIONS CAN BE MADE EASILY VIA [ALT]-* OR RUNNING THE ├╚┴╬╟┼.═╘╙ UTILITY PROGRAM. ├HANGES MADE VIA [ALT]-* CAN BE TEMPORARY OR SAVED TO DISKETTE AND THUS BECOME THE DEFAULT ASSIGNMENTS. ├ERTAIN KEYS CANNOT BE REDEFINED AS THEIR DEFINITION IS ESTABLISHED NOT BY ╓╘100-128 BUT BY THE ├128 KERNEL. ô ╓╘100-128 VERSION 2.1 ╙TATUS ╠INE -------------------------------------------------------------------- ╘HE ╓╘100-128 STATUS LINE APPEARS AT THE TOP OF THE DISPLAY: 60928 ┬╠╫╪╨╙╥╘ <PROMPT AND MESSAGE AREA, USUALLY BLANK> 1234 12:34:56 _____ ________ ____ ________ | | | | | \ / | AVAIL SPECIAL MODE INDICATORS ╠┼─ INDICATORS CLOCK BUFFER (SEE BELOW) (SEE BELOW) SPACE WHAT IT IS HOW IT GOT THERE INDICATOR ----------------------------- -------------------------- ----------- ┬UFFER CAPTURE ENABLED [ALT] ┬ ┬ ╠INEFEED MODE ENABLED [ALT] ╠ ╠ ┴UTOWRAP MODE ENABLED [ALT] <┼NGLISH POUND> ╫ ╘ERMINAL CURRENTLY ╪╧╞╞-ED [NO SCROLL] ╪ ╨RINTER ENABLED [ALT] ╨ ╨ ╙PLIT-SCREEN MODE ENABLED [ALT] ╚ ╙ ╥ETURN MODE ENABLED [ALT] <RETURN> ╥ ╪═╧─┼═ TRANSLATE MODE ENABLED SEE ╪═╧─┼═ COMMAND [ALT] ╪ ╘ ╠┼─ INDICATOR ╠1 THRU ╠4 ╧╬ SEE ┼╙├┴╨┼ SEQUENCES 1,2,3,4 ┴VAILABLE BUFFER SIZE SEE [ALT] ┬,├,─,╞ COMMANDS 60928 CLOCK SET VIA [ALT] ╩ 00:00:00 ô ╓╘100-128 VERSION 2.1 ╔NITIAL ╙TATES -------------------------------------------------------------------- ╘HE ╓╘100-128 PROGRAM, AS SUPPLIED, DEFAULTS TO THE FOLLOWING STATES. ╘HE USER CAN SAVE CUSTOM CONFIGURATIONS (SEE ┴╠╘-╧, ┴╠╘-╦, AND ┴╠╘-* COMMANDS) OR LOAD NEW CONFIGURATIONS (SEE ┴╠╘-╬). ╙TATE ╚OW TO CHANGE IT ╔NDICATOR ─EFAULT --------------------- ------------------- --------- ------------ ┬UFFER [ALT] ┬ ┬ ╧╞╞ ╠INEFEED MODE [ALT] ╠ ╠ ╧╞╞ ┴UTOWRAP MODE ENABLED [ALT] <┼. POUND> ╫ ╧╬ ╪╧╬/╪╧╞╞ [NO SCROLL], ^╤, ^╙ ╪ ╪╧╬ ╨RINTER [ALT] ╨ ╨ ╧╞╞ ╙PLIT-SCREEN MODE [ALT] ╚ ╙ ╧╞╞ ╥ETURN MODE [ALT] <RETURN> ╥ ╧╞╞ ╠┼─ INDICATORS 1,2,3,4 ╧╞╞ ├LOCK [ALT] ╩ 01:00:00 ╞LOWCONTROL [ALT] + OR [ALT] - ╧╬ ┴UTOREPEAT KEYS [ALT] ╤ OR [ALT] ╥ ╧╬ ╟RAPHICS [├=] <ESCAPE> ╧╬ ─ELETE KEY [ALT] <DELETE> ─┼╠=$7╞ ╔NTER-CHARACTER DELAY [ALT] ╔ ╧╞╞ ╞UNCTION KEYS [ALT] ╦ ╞1 (╨╞1) <ESC>╧╨ ╞3 (╨╞2) <ESC>╧╤ ╞5 (╨╞3) <ESC>╧╥ ╞7 (╨╞4) <ESC>╧╙ ═ODEM TYPE [ALT] ╧ 4 (1670) ─ISK DRIVE [ALT] ╧ 8 ╨RINTER (DEVICE 4) [ALT] ╧ 7 (SECOND. ADR) ╨RINTER HOLDOFF [ALT] ╧ 15 (1/4 SEC) ╒PLOAD PROMPT [ALT] ╧ $0─ (CR) ┴NSWERBACK (^┼,^┬╥┼┴╦) [ALT] ╧ DISABLED ╙CREEN COLORS [ALT] ╧ FIELD 6 (BLUE) [ALT] ╧ TEXT 1 (WHITE) [ALT] ╧ BOLD 10 (LT.RED) [ALT] ╧ STATUS 7 (YELLOW) [ALT] ╧ SPLIT 15 (GRAY) ╙CREEN BACKGROUND [ALT] ╓ NORMAL ├URSOR TYPE [ALT] <CRSR UP/DWN> BLINKING SQUARE ═ODEM SETTINGS [ALT] ═ BAUD 1200 [ALT] ═ DUPLEX FULL [ALT] ═ STOP BITS 1 [ALT] ═ WORD LENGTH 8 [ALT] ═ PARITY NONE [ALT] ═ BAUD ADJUSTMENT 0337 ═ODEM PARAMETERS ┴╘┼1 (COMMAND ECHO) ╧╬ ┴╘╓1 (RESULT CODES) VERBAL ┴╘╪1 (CODE SET) PARTIAL (0-5) ┴╘╙0=0 (AUTOANSWER) DISABLED ô ╓╘100-128 VERSION 2.1 ├OMMAND ╙ET -------------------------------------------------------------------- [ALT] ┴ ═ODEM ─IAL/┴NSWER/╚ANGUP ╘HIS COMMAND IS USED TO ─IAL A NUMBER, ┴NSWER THE TELEPHONE (TAKE THE TELEPHONE OFF-HOOK) OR ╚ANGUP THE TELEPHONE (PUT THE TELEPHONE ON-HOOK). ╘HE STATUS LINE WILL DISPLAY THE MODEM TYPE. ╔F THIS IS INCORRECT, HIT [STOP] AND CHANGE THE MODEM TYPE ON THE OPTIONS SCREEN VIA [├=]-╧. ├HARACTERS MUST BE ╠╧╫┼╥ CASE. ╘ERMINATE EACH COMMAND WITH <RETURN>. ├OMMANDS: T ─IAL (ORIGINATE) USING ─╘═╞ (TOUCH TONE). (SEE "─" IN MODEM COMMAND SUMMARY FOR DETAILS). P ─IAL (ORIGINATE) USING PULSE/ROTARY SERVICE. (SEE "─" IN MODEM COMMAND SUMMARY FOR DETAILS). A ┴NSWER A CALL (IF ANTOANSWER ENABLED- CHECK ─╔╨ SWITCHES, AND ┴╘╙0=X MODEM COMMAND). ╘AKES TELEPHONE OFF-HOOK. H ╚ANGUP A CALL. ╨UTS TELEPHONE ON-HOOK. [STOP] ┼XITS MODE. ┼XAMPLES: T5551212 ─IAL USING TOUCH TONE SERVICE. P5551212 ─IAL USING (PULSE OR ROTARY SERVICE). T8,5551212R; ─IAL USING TOUCH TONE, PAUSE, CALL AN ORIGINATE-ONLY SERVICE, AND STAY IN COMMAND MODE AFTER DIALING. H ╚ANGUP. -------------------------------------------------------------------- [ALT] ┬ ┬UFFER ENABLE/DISABLE TOGGLE ╘HIS COMMAND WILL TURN THE CAPTURE BUFFER ╧╬ IF IT IS CURRENTLY OFF, OR TURN IT ╧╞╞ IF IT IS CURRENTLY ON. ╔F IT IS ON, A "┬" IS DISPLAYED ON THE STATUS LINE. ╘HE AMOUNT OF AVAILABLE BUFFER SPACE IS ALWAYS DISPLAYED ON THE STATUS LINE, AT THE LEFTMOST MARGIN. ╘HE CAPTURE BUFFER IS A LARGE (ALMOST 64╦) AREA OF MEMORY PHYSICALLY LOCATED IN THE SECOND BANK OF ├128 ╥┴═. ╫HEN TURNED ON, SUBSEQUENT DATA RECIEVED FROM THE REMOTE SYSTEM WILL BE APPENDED TO THE DATA ALREADY IN THE BUFFER, IF ANY. ╫HEN TURNED OFF, THE DATA ALREADY IN THE BUFFER WILL REMAIN THERE UNTIL THE USER DISPOSES OF IT (SEE THE [ALT]-─, DUMP BUFFER, COMMAND). ╙HOULD THE BUFFER FILL COMPLETELY, THE REMOTE WILL AUTOMATICALLY BE PAUSED (╪╧╞╞-ED VIA ├╘╥╠-╙) AND THE MESSAGE "┬╒╞╞┼╥ ╞╒╠╠" WILL APPEAR ON THE STATUS LINE. ╘O RESUME NORMAL OPERATION, EITHER TURN THE BUFFER OFF ([ALT]-┬ TOGGLE) OR DISPOSE OF OF ITS CONTENTS ([ALT]-─ COMMAND), AND PRESS ├╘╥╠-╤ OR THE ├╥╙╥-╒╨/─╧╫╬ KEY TO TELL THE REMOTE SYSTEM TO CONTINUE. -------------------------------------------------------------------- [ALT] ├ ├OPY THE ╓╘100 SCREEN TO THE ┬UFFER ╒SE THIS COMMAND TO COPY THE CURRENT ╓╘100 SCREEN DISPLAY TO THE END OF THE CAPTURE BUFFER. ┼ACH LINE OF ┴╙├╔╔ TEXT ON THE SCREEN IS COPIED, WITH TRAILING SPACES REMOVED AND A RETURN CHARACTER APPENDED. ╧NLY THE ACTIVE TERMINAL AREA IS COPIED; THE STATUS LINE IS NOT COPIED. ╘HE NUMBER OF FREE BYTES IN THE BUFFER WILL DECREMENT ACCORDINGLY. ╘HE BUFFER CONTENTS MAY BE DISPLAYED, PRINTED, TRANSMITTED, OR SAVED TO DISK USING THE DUMP BUFFER COMMAND, ┴╠╘-─. -------------------------------------------------------------------- [ALT] ─ ─UMP THE MEMORY ┬UFFER ╘HIS COMMAND IS USED TO DISPLAY, SAVE, OR DELETE THE CURRENT CONTENTS OF THE MEMORY BUFFER. ╔F THE BUFFER IS EMPTY, A MESSAGE IS DISPLAYED AND THE COMMAND ENDS. ╫HEN PROMPTED, SELECT THE OPERATION YOU WISH TO PERFORM. ┬EFORE THE BUFFER IS OUTPUT YOU WILL BE ASKED IF YOU WANT THE LINEFEED CHARACTERS FILTERED (SEE NOTE BELOW). ┴FTER THE BUFFER IS OUTPUT, YOU WILL BE ASKED IF YOU WANT THE BUFFER CLEARED (EMPTIED). ┘OU CAN ABORT ANY OPERATION AT ANY POINT BY PRESSING ╙╘╧╨. ─ ─ISK FILE OUTPUT. ╙ELECT THE ├┬═ FILE TYPE (╙┼╤UENTIAL OR ╨╥O╟RAM), AND ENTER THE FILENAME. ╘HE BUFFER CONTENTS WILL BE SAVED ACCORDINGLY. ╞OR ╨╥╟ TYPE FILES, THE LOAD ADDRESS WILL BE THAT OF THE MEMORY BUFFER ($1000). ─ISK ERROR MESSAGES ARE DISPLAYED. ╘HE DISK DEVICE NUMBER IS SELECTED ON THE OPTIONS (├=╧) SCREEN. ╨ ╨RINTER OUTPUT. ╘HE BUFFER CONTENTS ARE FILTERED (ESCAPE SEQUENCES AND SOME CONTROL CODES ($08>CHR>$0╞) ARE EXTRACTED) BUT ARE OTHERWISE UNALTERED. ╘HERE IS NO ┴╙├╔╔-╨┼╘╙├╔╔ DATA TRANSLATION PERFORMED. ┴N ERROR MESSAGE IS DISPLAYED IF THE PRINTER IS NOT PRESENT. ╘HE PRINTER SECONDARY ADDRESS (├┬═ MODE), AND HOLD-OFF GUARD TIME ARE SELECTED ON THE OPTIONS (├=╧) SCREEN. ╞OR OTHER PRINTER COMMANDS, SEE ┴╠╘-╨, ┴╠╘-╙, AND ┴╠╘-╘ (PRINTER BUFFERING, PRINT SCREEN, PRINT FILE). ┬EFORE PRINTING, THE PROMPT '╞ILTER ╠INEFEEDS?' WILL APPEAR. ┴NSWER '┘'ES TO REMOVE THEM FROM THE OUTPUT, '╬'O TO OUTPUT THEM WHENEVER THEY APPEAR, OR '┴'DD TO CONVERT <CR> INTO <CR><LF> ON OUTPUT. ╘HE PRINTER IS ALWAYS ASSUMED TO BE DEVICE #4. ╙ ╙CREEN DISPLAY OUTPUT. ╘HE BUFFER CONTENTS ARE OUTPUT TO THE SCREEN JUST AS IF THEY WERE RECIEVED FROM THE REMOTE COMPUTER, INCLUDING FULL ╓╘100 ESCAPE SEQUENCE PROCESSING, CONTROL CODES, ETC. ╒SE THE ╬╧-╙├╥╧╠╠ KEY TO PAUSE THE DISPLAY, THE ├= KEY TO SLOW THE DISPLAY. ┴S AN ADDED FEATURE, BEFORE THE SCREEN IS CLEARED BY SPECIFIC ESCAPE SEQUENCES, THE SCREEN DUMP WILL HALT, THE PROMPT ╨╥┼╙╙ ┴ ╦┼┘ WILL APPEAR, AND ╓╘100-128 WILL WAIT FOR ANY KEY TO BE PRESSED. ╘HERE IS NO ┴╙├╔╔-╨┼╘╙├╔╔ TRANSLATION. ┬EFORE PRINTING, THE PROMPT '╞ILTER ╠INEFEEDS?' WILL APPEAR. ┴NSWER '┘'ES TO REMOVE THEM FROM THE OUTPUT, '╬'O TO OUTPUT THEM WHENEVER THEY APPEAR, OR '┴'DD TO CONVERT <CR> INTO <CR><LF> ON OUTPUT. ═ ═ODEM OUTPUT. ╘HE BUFFER CONTENTS ARE TRANSMITTED TO THE REMOTE JUST AS IF YOU HAD TYPED THEM. ╘HE DATA IS TRANSMITTED ONE LINE (OR ONE BLOCK) AT A TIME, THEN ╓╘100-128 WAITS FOR THE REMOTE TO RESPOND WITH THE UPLOAD PROMPT (SET ON THE OPTIONS SCREEN, ├=╧). ╞OR NORMAL OPERATIONS, THE UPLOAD PROMPT SHOULD BE <RETURN>. ├ ├LEAR THE BUFFER. ╘HE CONTENTS OF THE BUFFER WILL BE DISCARDED AND THE AMOUNT OF FREE BUFFER MEMORY WILL BE RESET TO THE FULL AMOUNT. ┴N ACCIDENTALLY CLEARED BUFFER CAN BE RECOVERED VIA [ALT]<UP ARROW>, SUBJECT TO ANY BUFFER OPERATIONS WHICH MAY HAVE SUBSEQUENTLY OCCURRED. -------------------------------------------------------------------- [ALT] ┼ ┼RASE THE SCREEN. ╘HE LOCAL ╓╘100 DISPLAY IS CLEARED. ╬OTHING IS TRANSMITTED. -------------------------------------------------------------------- [ALT] ╞ ╠OAD A DISK ╞ILE INTO THE MEMORY ┬UFFER. ╘HIS COMMAND WILL COPY (APPEND) A DISK FILE TO THE MEMORY BUFFER. ╔F THE BUFFER ALREADY CONTAINS DATA, THE ├╠┼┴╥ ┬╒╞╞┼╥? QUERY APPEARS, PROVIDING THE USER THE OPPORTUNITY TO RESET THE BUFFER IF DESIRED. ╙ELECT THE ├┬═ FILE TYPE (╙┼╤UENTIAL OR ╨╥O╟RAM), AND ENTER THE FILENAME WHEN PROMPTED. ╘HE FILE WILL BE LOADED (OR APPENDED TO THE CURRENT CONTENTS OF THE BUFFER), AND THE NUMBER OF FREE BYTES IN THE BUFFER WILL DECREMENT ACCORDINGLY. ╞OR ╨╥╟-TYPE FILES THE LOAD ADDRESS WILL BE IGNORED. ─ISK ERROR MESSAGES ARE DISPLAYED. ╘HE BUFFER CONTENTS MAY BE DISPLAYED, PRINTED, TRANSMITTED, OR SAVED BACK TO DISK USING THE DUMP BUFFER COMMAND ┴╠╘-─. ╘HE DISK DEVICE NUMBER IS SELECTED ON THE OPTIONS (├=╧) SCREEN. -------------------------------------------------------------------- [ALT] ╚ ╙PLIT ╙CREEN (╠INE ┼NTRY) ═ODE. ╘HIS KEY SEQUENCE PLACES ╓╘100-128 INTO ╠INE ┼NTRY MODE. ╘HE CURSOR IS PLACED ON THE BOTTOM-MOST LINE OF THE SCREEN, AND ANYTHING TYPED IS NOT TRANSMITTED UNTIL <RETURN> IS PRESSED OR 80 CHARACTERS HAVE BEEN TYPED. ╘O TRANSMIT DATA WITHOUT <RETURNED> APPENDED (SUCH AS TO TRANSMIT SINGLE CONTROL CODES), TERMINATE THE LINE BY PRESSING <ENTER> INSTEAD OF <RETURN>. ┼XIT ╠INE ┼NTRY MODE AT ANY TIME BY PRESSING THE <STOP> KEY (ANY DATA NOT YET TRANSMITTED WILL BE LOST). ╘HE COLOR OF THE SPECIAL "SPLIT" LINE CAN BE SPECIFIED ON THE OPTIONS (├=╧) SCREEN. ╘HIS MODE IS USEFUL FOR ONLINE CONFERENCING BECAUSE IT ALLOWS TEXT TO BE TYPED WITHOUT IT BEING MIXED WITH OTHER INFORMATION BEING BROADCAST AT THE SAME TIME. ╬OTE THAT THE USE OF ╠INE ┼NTRY MODE WILL INTERFERE WITH SOME ╓╘100 ESCAPE SEQUENCES, AND SHOULD NOT BE USED IN SUCH APPLICATIONS. -------------------------------------------------------------------- [ALT] ╔ ╔NTER-CHARACTER DELAY ENABLE/DISABLE TOGGLE. ╘HIS COMMAND WILL ENABLE AND DISABLE INTER-CHARACTER DELAYS. ╫HEN ╧╬, A 1/30 SECOND DELAY IS IMPOSED FOLLOWING THE TRANSMISSION OF EACH CHARACTER. ╔NTER-CHARACTER DELAYS ARE NORMALLY ╧╞╞. ╘HEY SHOULD BE ENABLED ONLY TO SLOW DOWN UPLOADS WHEN THE REMOTE SYSTEM IS UNABLE TO HANDLE SUCH DATA TRANSFER AT FULL SPEED. ╨RESS ┴╠╘-╔ ONCE TO ENABLE DELAYS, PRESS IT A SECOND TIME TO DISABLE DELAYS. ┴ MESSAGE IS DISPLAYED ON THE STATUS LINE INDICATING THE SELECTED STATE. -------------------------------------------------------------------- [ALT] ╩ ╙ET THE ├LOCK. ╘HE 24-HOUR SYSTEM ╘╧─ (╘IME ╧F ─AY) CLOCK, DISPLAYED ON THE FAR RIGHT SIDE OF THE STATUS LINE, CAN BE SET WITH THIS COMMAND. ┼NTER THE TIME IN THE USUAL FORM (╚╚══╙╙). ╘HE SYSTEM WILL AUTOMATICALLY TYPE THE ':' BETWEEN EACH PAIR OF DIGITS AND EXIT ONCE THE SECONDS HAVE BEEN ENTERED. ╨RESS <DEL> TO RESTART ╘╧─ ENTRY FROM THE BEGINNING. ╨RESS <STOP> TO EXIT AT ANY TIME, LEAVING REMAINING ╘╧─ REGISTERS UNCHANGED. -------------------------------------------------------------------- [ALT] ╦ ╞UNCTION ╦EY DEFINITION MODE. ╘HIS MODE IS USED TO DISPLAY, CHANGE, SAVE, OR LOAD FUNCTION KEY STRINGS. ╙ELECT THE OPERATION DESIRED FROM THE PROMPT MENU. ┼XIT FUNCTION KEY DEFINITION MODE AT ANY TIME BY PRESSING <╙╘╧╨>. ╓ ╓IEW CURRENT DEFINITIONS. ├ONTROL CODES APPEAR AS REVERSE FIELD CHARACTERS, <RETURN> APPEARS AS A CHECK MARK. ╒NDEFINED KEYS ARE NOT LISTED. ╠ ╠OAD DEFINITIONS FROM DISK FILE. ┼NTER THE FILENAME OF THE ╨╥╟-TYPE FILE CONTAINING THE DESIRED DEFINITIONS. ╘HE DEFAULT DEFINITIONS ARE STORED IN THE FILE ─┼╞┴╒╠╘.╦┼┘╙. ─ISK ERRORS ARE DISPLAYED, AND THE LOAD OPERATION ABORTS ON ANY ERROR. ╙ ╙AVE CURRENT DEFINITIONS IN A DISK FILE. ┼NTER THE FILENAME OF THE ╨╥╟-TYPE FILE TO CREATE. ╘O OVERLAY AN EXISTING FILE, PRECEDE THE FILENAME WITH AN '@' CHARACTER. ╘O MAKE THE CURRENT DEFINITIONS THE ╓╘100-128 DEFAULTS, ENTER '@─┼╞┴╒╠╘.╦┼╘╙' AS THE FILENAME (SEE THE NOTE BELOW). ─ISK ERRORS ARE DISPLAYED. 1-8 ╘O CHANGE A FUNCTION KEY STRING, ENTER THE NUMBER (1 TO 8) OF THE DESIRED KEY AND TYPE THE STRING. ├ONTROL CODES APPEAR AS REVERSE FIELD CHARACTERS, AND THE <RETURN> CHARACTER APPEARS AS A CHECK MARK. ┼ND THE DEFINITION BY PRESSING <╙╘╧╨>. ╥EMOVE A DEFINITION BY SELECTING THE KEY NUMBER AND TERMINATING THE STRING ENTRY IMMEDIATELY WITH <╙╘╧╨>. ╘O SAVE ANY CHANGES, OR TO MAKE ANY CHANGES PERMANENT, SEE THE ╙AVE OPTION ABOVE. ╘O RESTORE THE DEFAULT DEFINITIONS, SEE THE ╠OAD OPTION ABOVE. ╒P TO EIGHT FUNCTION KEY STRINGS, ╨╞1 THROUGH ╨╞4 SHIFTED AND UNSHIFTED, CAN BE DEFINED. ╘HE MAXIMUM LENGTH OF A STRING IS 128 CHARACTERS, AND THE MAXIMUM LENGTH OF ALL STRINGS COMBINED IS 240 CHARACTERS. ╦EY INPUT STOPS WHEN EITHER LIMIT IS REACHED, AND ╓╘100-128 WAITS FOR THE USER TO PRESS <╙╘╧╨> OR <─┼╠┼╘┼>. ╞UNCTION KEYS CAN BE PROGRAMMED WITH STRINGS SUCH AS YOUR LOGIN OR USER ╔─, PASSWORD, MODEM SETUP (┴╘) COMMANDS, OR PHONE NUMBERS. ╬OTE THAT CHANGING THE ODD NUMBERED FUNCTION KEYS (1,3,5, OR 7) WILL AFFECT THE ╓╘100 KEYPAD APPLICATION MODE, AND SO SHOULD BE AVOIDED FOR SUCH APPLICATIONS. -------------------------------------------------------------------- [ALT] ╠ ╠INEFEED (NEWLINE) TOGGLE. ╘HIS COMMAND WILL ENABLE AND DISABLE NEW LINE MODE. ╫HEN ╧╬, THE STATUS LINE '╠' INDICATOR WILL BE DISPLAYED AND PRESSING <RETURN> WILL GENERATE THE <RETURN><LINEFEED> CHARACTER SEQUENCE. ╫HEN ╧╞╞, PRESSING <RETURN> WILL GENERATE ONLY A <RETURN> CHARACTER. ╔F THE HOST COMPUTER AUTOMATICALLY SENDS <RETURN><LINEFEED> CODES THEN THIS MODE SHOULD BE ╧╞╞ FOR NORMAL OPERATION (DEFAULT). -------------------------------------------------------------------- [ALT] ═ ═ODEM SETUP. ╫HEN SETUP MODE IS ENTERED, THE STATUS LINE AT THE TOP OF THE DISPLAY WILL SUMARIZE THE CURRENT MODEM SETUP. ╘HERE ARE 48 PREDEFINED CONFIGURATIONS FROM WHICH TO CHOOSE, SELECTED BY PRESSING THE LOWER <CURSOR_UP/DOWN> KEY. ╨RESS <CURSOR_DOWN> TO ADVANCE THE SELECTION OR <CURSOR_UP> (USING THE SHIFT KEY) TO BACK UP THE SELECTION. ╘HE TABLE BELOW LISTS THE OPTIONS AVAILABLE: BAUD BAUD BAUD | DUPLEX | DUPLEX | DUPLEX | | STOP BITS | | STOP BITS | | STOP BITS | | | WORD LENGTH | | | WORD LENGTH | | | WORD LENGTH | | | | PARITY | | | | PARITY | | | | PARITY | | | | | FACTOR | | | | | FACTOR | | | | | FACTOR | | | | | | | | | | | | | | | | | | 0300:╞:1╙:8╫:╬:1605 *1200:╞:1╙:8╫:╬:0329 2400:╞:1╙:8╫:╬:0119 0300:╞:1╙:7╫:┼:1605 1200:╞:1╙:7╫:┼:0329 2400:╞:1╙:7╫:┼:0119 0300:╞:1╙:7╫:╧:1605 1200:╞:1╙:7╫:╧:0329 2400:╞:1╙:7╫:╧:0119 0300:╞:1╙:7╫:═:1605 1200:╞:1╙:7╫:═:0329 2400:╞:1╙:7╫:═:0119 0300:╞:1╙:7╫:╙:1605 1200:╞:1╙:7╫:╙:0329 2400:╞:1╙:7╫:╙:0119 0300:╞:2╙:7╫:╬:1605 1200:╞:2╙:7╫:╬:0329 2400:╞:2╙:7╫:╬:0119 0300:╚:1╙:8╫:╬:1605 1200:╚:1╙:8╫:╬:0329 2400:╚:1╙:8╫:╬:0119 0300:╚:1╙:7╫:┼:1605 1200:╚:1╙:7╫:┼:0329 2400:╚:1╙:7╫:┼:0119 0300:╚:1╙:7╫:╧:1605 1200:╚:1╙:7╫:╧:0329 2400:╚:1╙:7╫:╧:0119 0300:╚:1╙:7╫:═:1605 1200:╚:1╙:7╫:═:0329 2400:╚:1╙:7╫:═:0119 0300:╚:1╙:7╫:╙:1605 1200:╚:1╙:7╫:╙:0329 2400:╚:1╙:7╫:╙:0119 0300:╚:2╙:7╫:╬:1605 1200:╚:2╙:7╫:╬:0329 2400:╚:2╙:7╫:╬:0119 ╘HE (*) INDICATES THE DEFAULT SETUP FOR THIS MODEM. ╬OT EVERY MODEM OR COMPUTER SUPPORTS ALL THE BAUD RATES LISTED ABOVE. ╘HE BAUD RATE FACTOR (LAST ITEM IN EACH COLUMN ABOVE) CAN BE USED TO FINE TUNE THE BAUD RATE FACTOR IF NECESSARY. ╨RESS THE '+' KEY TO INCREASE THE FACTOR (DECREASE THE EFFECTIVE BAUD RATE), OR PRESS THE '-' KEY TO DECREASE THE FACTOR (INCREASE THE EFFECTIVE BAUD RATE). ┴DJUSTING THIS VALUE IS NOT NORMALLY NECESSARY. ╠ARGE CHANGES TO THE FACTOR CAN BE USED TO ACHIEVE ALTERNATIVE NOMINAL BAUD RATES. ╞OR EXAMPLE, A VALUE OF 0010 WILL RESULT IN A BAUD RATE OF 4800 (WORKS PRETTY WELL FOR ╪═╧─┼═ TRANSFERS, READING EMAIL, AND OTHER SIMILAR ACTIVITIES WHICH DO NOT INVOLVE MUCH INTERACTIVE COMMUNICATION OR MOVING MORE THAN A SCREEN-FULL OF DATA AT A TIME). ╨RESS <STOP> TO EXIT SETUP MODE. ╘HE MODEM CHANNEL WILL BE RE-OPENED WITH THE NEW SETUP PARAMETERS. ╘HE CURRENT MODEM SETUP IS SAVED WHENEVER THE OPTIONS ARE SAVED (SEE ┴╠╘-╧), AND IS CHANGED WHENEVER NEW OPTIONS ARE LOADED (SEE ┴╠╘-╬). -------------------------------------------------------------------- [ALT] ╬ ╠OAD ╬EW ╧PTIONS. ╘HE ╓╘100-128 SETUP CONFIGURATION, INCLUDING SCREEN COLORS, DEFAULT DISK DEVICE, PRINTER AND MODEM PARAMETERS, CAN BE RE-LOADED FROM DISK USING THIS COMMAND. ╘HESE PARAMETERS ARE SAVED IN A DISK FILE CALLED ╧╨╘╙┼╘.═╘╙, WHICH MUST BE PRESENT IN THE CURRENTLY SELECTED DISK DEVICE. ╘HE DISK STATUS IS DISPLAYED ON THE STATUS LINE. ╙EE ┴╠╘-═ AND ├=╧ TO CHANGE THESE PARAMETERS, AND SEE ┴╠╘-╧ TO SAVE CUSTOM CONFIGURATIONS TO DISK. ╬OTE THAT SPECIAL ATTRIBUTE MODES (SUCH AS UNDERLINE AND BLINK) WILL BE RESET AFTER THE LOAD. -------------------------------------------------------------------- [ALT] ╧ ╙AVE ├URRENT ╧PTIONS. ╘HE CURRENT ╓╘100-128 SETUP CONFIGURATION, INCLUDING SCREEN COLORS, DEFAULT DISK DEVICE, AND PRINTER AND MODEM PARAMETERS, CAN BE SAVED TO A DISK FILE USING THIS COMMAND. ╘HESE PARAMETERS ARE SAVED IN A DISK FILE CALLED ╧╨╘╙┼╘.═╘╙ ON THE CURRENTLY SELECTED DISK DEVICE. ╔F THE FILE ALREADY EXISTS, IT WILL BE DELETED FIRST. ┴LL DISK ERROR MESSAGES ARE DISPLAYED ON THE STATUS LINE. ╙EE ┴╠╘-═ AND ├=╧ TO CHANGE THESE PARAMETERS, AND SEE ┴╠╘-╬ TO LOAD CUSTOM CONFIGURATIONS FROM DISK. ╙PECIAL ATTRIBUTE MODES (SUCH A BLINK) CANNOT BE SAVED. -------------------------------------------------------------------- [ALT] ╨ ╨RINTER BUFFER TOGGLE. ╘HIS COMMAND WILL ENABLE AND DISABLE THE PRINTER CAPTURE BUFFER. ╫HEN ╧╬, STATUS LINE '╨' INDICATOR WILL BE DISPLAYED AND DATA RECIEVED WILL BE BOTH DISPLAYED ON THE SCREEN AND SPOOLED TO THE PRINTER. ╘HE DATA ARE FILTERED (ESCAPE SEQUENCES AND SOME CONTROL CODES ($08>CHR>$0╞) ARE EXTRACTED) BUT ARE OTHERWISE UNALTERED. ╘HERE IS NO ┴╙├╔╔-╨┼╘╙├╔╔ DATA TRANSLATION PERFORMED. ┴N ERROR MESSAGE IS DISPLAYED IF THE PRINTER IS NOT PRESENT. ╘HE PRINTER SECONDARY ADDRESS (├┬═ MODE) AND HOLD-OFF GUARD TIME ARE SELECTED ON THE OPTIONS (├=╧) SCREEN. ╘HE PRINTER IS ALWAYS ASSUMED TO BE DEVICE #4. ╒SING THE PRINTER TO CAPTURE DATA MAY NOT BE THE MOST EFFICIENT NOR COST EFFECTIVE WAY TO ACCUMULATE DATA, AS THROUGHPUT IS EFFECTIVELY REDUCED TO THE SPEED OF THE PRINTER. ├ONSIDER INSTEAD ENABLING THE MEMORY CAPTURE BUFFER (┴╠╘-┬), AND AFTER CONCLUDING THE SESSION DUMPING THE MEMORY BUFFER TO THE PRINTER (┴╠╘-─). ╒SE ┴╠╘-╙ TO DUMP THE CONTENTS OF THE CURRENT DISPLAY SCREEN TO THE PRINTER. ╒SE ┴╠╘-╘ TO PRINT THE CONTENTS OF A ╙┼╤UENTIAL DISK FILE. ╨RESS ┴╠╘-╨ AGAIN TO DISABLE THE PRINTER SPOOL. ┴NY DATA REMAINING IN THE SPOOL WILL BE PRINTED, AND THE PRINTER CHANNEL WILL BE CLOSED. -------------------------------------------------------------------- [ALT] ╤ ┴UTO-╥EPEAT ENABLE. ╘HIS COMMAND WILL ENABLE AUTOMATIC KEY REPETITION. ╫HEN ╧╬, ANY KEY PRESSED FOR LONGER THAN 1/2 SECOND WILL REPEAT AT THE RATE OF ABOUT 15 CHARACTERS PER SECOND. ╘HIS COMMAND AFFECTS ALL MODES OF ╓╘100-128 INCLUDING THE COMMUNICATIONS SCREEN, ─╧╙ SCREEN, ETC. ╘HERE IS NO VISUAL MESSAGE OR STATUS LINE INDICATOR FOR THIS MODE. ╨RESS ┴╠╘-╥ TO DISABLE AUTO-REPEAT MODE. ╘HE DEFAULT STATE IS ╧╬. -------------------------------------------------------------------- [ALT] ╥ ┴UTO-╥EPEAT DISABLE. ╘HIS COMMAND WILL DISABLE AUTOMATIC KEY REPETITION. ╫HEN ╧╞╞, NO KEY WILL REPEAT; EACH KEY DEPRESSION GENERATES ONE CODE NO MATTER HOW LONG THE KEY IS HELD DOWN. ╘HIS COMMAND AFFECTS ALL MODES OF ╓╘100-128 INCLUDING THE COMMUNICATIONS SCREEN, ─╧╙ SCREEN, ETC. ╘HERE IS NO VISUAL MESSAGE OR STATUS LINE INDICATOR FOR THIS MODE. ╨RESS ┴╠╘-╤ TO RE-ENABLE AUTO-REPEAT MODE. ╘HE DEFAULT STATE IS ╧╬. -------------------------------------------------------------------- [ALT] ╙ ╙CREEN DUMP TO PRINTER. ╘HIS COMMAND WILL COPY THE CURRENT CONTENTS OF THE DISPLAY SCREEN (NOT INCLUDING THE STATUS LINE) TO THE PRINTER. ┴N ERROR MESSAGE IS DISPLAYED IF THE PRINTER IS NOT PRESENT. ╘HE PRINTER HOLD-OFF TIME SECONDARY ADDRESS (├┬═ MODE) ARE SELECTED ON THE OPTIONS (├=╧) SCREEN. ╘HIS COMMAND CAN BE USED TO PRINT THE ╓╘100 SCREEN, HELP SCREENS, ─╧╙ SCREEN, AND OPTIONS SCREEN. ╘HE PRINTER IS ALWAYS DEVICE #4. -------------------------------------------------------------------- [ALT] ╘ ╘YPE A DISK FILE. ╘HIS COMMAND WILL DISPLAY ON THE SCREEN OR PRINT THE CONTENTS OF A ╙┼╤UENTIAL DISK FILE. ╫HEN PROMPTED, SELECT EITHER SCREEN OR PRINTER AS THE OUTPUT DESTINATION AND ENTER THE FILENAME. ╘HE FILE MUST BE PRESENT ON THE CURRENTLY SELECTED DISK DEVICE. ╘HE DISK STATUS IS DISPLAYED ON THE STATUS LINE. ╔F THE OUTPUT IS TO THE PRINTER, AN ERROR MESSAGE IS DISPLAYED IF THE PRINTER IS NOT PRESENT. ╒SE ├=╧ TO CHANGE THE DISK AND PRINTER PARAMETERS, IF NECESSARY, BEFORE PRINTING A FILE. ╨RESS <╙╘╧╨> TO ABORT THE OUTPUT. ╨RESS ANY KEY WHEN FINISHED TO RETURN TO THE COMMUNICATIONS SCREEN. ╨┼╘╙├╔╔ DATA ARE ASSUMED. ╫HEN ╘YPING TO THE ╙CREEN, NO ESCAPE CODES WILL BE PROCESSED. ╔NSTEAD, THEY, AND OTHER CONTROL CODES EXCEPT <├╥>, WILL BE DISPLAYED IN REVERSE FIELD. ╘HIS IS VERY USEFUL FOR VIEWING EXACTLY WHAT A FILE CONTAINS. ╘O DISPLAY THE CONTENTS OF A FILE NORMALLY, USE ┴╠╘-╞ TO LOAD THE FILE INTO THE MEMORY BUFFER THEN USE ┴╠╘-─ TO DUMP THE BUFFER TO THE SCREEN. -------------------------------------------------------------------- [ALT] ╒ ╒PLOAD A FILE. ╒SE THIS COMMAND TO TRANSMIT DATA FROM A ╙┼╤UENTIAL DISK FILE TO THE REMOTE SYSTEM WITHOUT PROTOCOL, TRANSLATION, OR ERROR CHECKING. ╘HE DATA IS TRANSMITTED JUST AS IF IT HAD BEEN ENTERED FROM THE KEYBOARD. ┼NTER THE ╙┼╤UENTIAL FILENAME WHEN PROMPTED. ╘HE FILE MUST BE PRESENT ON THE CURRENTLY SELECTED DISK DEVICE. ╘HE DISK STATUS IS DISPLAYED ON THE STATUS LINE. ╨RESS <╙╘╧╨> AT ANY TIME TO ABORT THE UPLOAD. ┬EFORE USING THIS COMMAND, SELECT THE APPROPRIATE DISK UNIT AND UPLOAD PROMPT CHARACTER (NORMALLY <RETURN>) ON THE ├=╧ OPTIONS SCREEN. ┴LSO SEE ┴╠╘-╔ (INTERCHARACTER DELAYS) AND ┴╠╘+/- (FLOW CONTROL). ╘HIS METHOD OF UPLOADING IS USEFUL FOR TRANSFERRING SMALL FILES OR TRANSMITTING "CANNED", PRE-WRITTEN MESSAGES. ╞OR LARGER FILES, AN ERROR CHECKING PROTOCOL SUCH AS XMODEM (┴╠╘-╪) IS STRONGLY RECOMMENDED. -------------------------------------------------------------------- [ALT] ╓ ╓IDEO INVERT FIELD TOGGLE. ╘HIS COMMAND INVERTS THE VIDEO DISPLAY (REVERSE FIELD). ╘HE CHARACTER COLOR BECOMES THE BACKGROUND COLOR AND THE BACKGROUND COLOR BECOMES THE FOREGROUND COLOR. ╨RESS THE KEY A SECOND TIME TO RESTORE NORMAL VIDEO. ╘HESE CONDITIONS MAY BE LOCALLY REVERSED DEPENDING UPON OTHER CHARACTER ATTRIBUTES. ╘HE VIDEO MODE IS SAVED OR RESTORED WHENEVER THE CURRENT OPTIONS ARE SAVED (┴╠╘-╧) OR LOADED (┴╠╘-╬). ╘HE DEFAULT STATE IS ╧╞╞. -------------------------------------------------------------------- [ALT] ╫ ─╧╙ COMMAND MODE. ╘HIS COMMAND PLACES THE SYSTEM INTO ─╧╙ COMMAND MODE (OFTEN CALLED ─╧╙ ╫EDGE ON ├OMMODORE 6502 COMPUTERS). ╔F FLOW CONTROL IS ENABLED (┴╠╘+/-) THE HOST IS ╪╧╞╞-ED UNTIL YOU EXIT ─╧╙ COMMAND MODE AND RETURN TO THE COMMUNICATIONS SCREEN. ┼XIT ─╧╙ COMMAND MODE BY PRESSING <╙╘╧╨>. ╞ROM ─╧╙ COMMAND MODE, YOU CAN ISSUE ─╧╙ COMMANDS (DELETE OR RENAME FILE(S), ETC.), DISPLAY THE DIRECTORY, OR DISPLAY THE DISK STATUS MESSAGE OF THE CURRENTLY SELECTED DISK DRIVE (BEFORE ENTERING ─╧╙ COMMAND MODE, USE ├=╧ TO SPECIFY THE DISK UNIT ON THE OPTIONS SCREEN). ╞OLLOWING EACH ─╧╙ COMMAND, THE ─╧╙ ERROR MESSAGE IS DISPLAYED IN BOLD TEXT. ╨RESS <NO-SCROLL> TO PAUSE A DIRECTORY LISTING, OR <STOP> TO ABORT A LISTING. ─O NOT SEND ANY DATA TO THE DISK COMMAND CHANNEL UNLESS THE DATA IS INTENDED TO BE A COMMAND. ╙OME OF THE COMMON DISK COMMANDS ARE LISTED BELOW. ╥EFER TO THE APPROPRIATE DISK MANUAL FOR A COMPLETE DESCRIPTION OF THE COMMANDS IT SUPPORTS. ─ELETE (SCRATCH) A FILE: ╙0:FILENAME ╥ENAME A FILE: ╥0:NEW_NAME=0:OLD_NAME ╞ORMAT A DISK: ╬0:DISK_NAME,ID ╔NITILAIZE A DRIVE: ╔0 ─IRECTORY: $ (ALL FILES) $0:VT* (ALL FILES BEGINNING WITH 'VT') ╙TATUS (─╧╙ ERROR MESSAGE): <RETURN> -------------------------------------------------------------------- [ALT] ╪ ╪═╧─┼═ FILE TRANSFER PROTOCOL. ╪═╧─┼═ IS A PACKET FILE TRANSFER UTILITY, IMPLEMENTING THE ├HRISTENSEN PROTOCOL. ╪═╧─┼═ MUST BE RUN BY BOTH THE SENDER AND RECIEVER- IF YOUR HOST SYSTEM CANNOT RUN ╪═╧─┼═ YOU WILL HAVE TO TRANSFER THE FILE ANOTHER WAY (SEE ┴╠╘-╒ AND ┴╠╘-┬). ╞ILES ARE SENT OR RECEIVED WITHOUT LOCAL CONVERSION (SEE ╘ OPTION BELOW) IN 128-BYTE PACKETS USING A CHECKSUM FOR ERROR DETECTION. ╔N THE EVENT OF A CHECKSUM ERROR, THE PACKET IS REPEATED. ┼XCESSIVE ERRORS OR TIMEOUTS CAUSE ╪═╧─┼═ TO ABORT. ├╥├ ERROR CHECKING, ╪═╧─┼═-1K, AND BATCH PROTOCOLS LIKE ┘═╧─┼═ OR ═╧─┼═7 ARE NOT SUPPORTED. ╘O BEGIN A TRANSFER, FIRST START ╪═╧─┼═ ON THE HOST SYSTEM (REFER TO HOST SYSTEM'S DOCUMENTATION FOR PROCEEDURE). ╫HEN PROMPTED BY THE HOST, START ╪═╧─┼═ LOCALLY BY PRESSING ┴╠╘-╪, AND ENTER THE FILENAME, FILE TYPE, READ/WRITE MODE, AND OPTIONAL TRANSLATE FLAG AS FOLLOWS: FILENAME, TYPE, DIRECTION [,TRANSLATE] <FILENAME> IS VALID NAME OF EXISTING FILE IF SENDING, OR NON-EXISTANT FILE (OR PRECEDED WITH '@0:') IF RECEIVING. <TYPE> IS P FOR A ╨╥O╟RAM FILE S FOR A ╙┼╤UENTIAL FILE U FOR A ╒╙E╥ FILE <DIRECTION> IS W FOR RECIEVING (OPEN ╫RITE FILE) R FOR SENDING (OPEN ╥EAD FILE) <TRANSLATE> IS T TO TRANSLATE ┴╙├╔╔-╨┼╘╙├╔╔ (RECEIVE) OR ╨┼╘╙├╔╔-┴╙├╔╔ (SEND) ╘HE TRANSFER STATUS WILL BE SHOWN ON THE STATUS LINE AS FOLLOWS: ╘╧╘ ┬╠╦ 0000 ├╚╦=X WHERE '0000' IS THE CURRENT 128K BYTE BLOCK BEING TRANSFERED AND 'X' IS ┴ IF THE TRANSFER IS GOOD OR ╬ IS THE TRANSFER IS BAD AND BEING AUTOMATICALLY RETRIED. ─ISK ERRORS ARE DISPLAYED ON THE STATUS LINE, AND RESULT IN THE CANCELATION OF THE TRANSFER. ╘HE FILE MUST BE PRESENT (IF SENDING) OR MUST NOT EXIST (IF RECEIVING) ON THE CURRENTLY SELECTED DRIVE (SELECT THE DRIVE UNIT ON THE OPTIONS SCREEN (├=╧)). ╨RESS <STOP> AT ANY TIME TO ABORT A TRANSFER. ╔F A DOWNLOAD IS ABORTED OR CANCELED, THE FILE IS CLOSED BUT NOT DELETED (AND PLEASE BE PATIENT- ╪═╧─┼═ PROTOCOL HAS NO WAY TO TELL THE SENDER TO ABORT EXCEPT VIA TIMEOUTS OR 10 CONSECUTIVE ╬┴╦S. ╘HIS TAKES SOME TIME.). -------------------------------------------------------------------- [ALT] ┌ ┼XIT ╓╘100-128. ╒SE THIS COMMAND TO QUIT THE ╓╘100-128 PROGRAM. ┬EFORE EXITING, YOU ARE ASKED TO CONFIRM YOUR DESIRE TO QUIT. ╔F THERE IS DATA IN THE MEMORY BUFFER, YOU WILL BE ASKED IF YOU WANT IT SAVED. ╨RESS <STOP> AT ANY POINT TO CANCEL THE ╤UIT OPERATION. ╘HE PROGRAM CAN BE RE-╥╒╬ IMMEDIATELY BY TYPING ╥╒╬<RETURN>. ╘HE ╥┴═DISK, IF INSTALLED, IS LEFT INTACT AND ACCESSIBLE. ╘HE MODEM IS ╬╧╘ TOLD TO HANG UP- IF YOU ARE ONLINE THE CARRIER IS MAINTAINED UNTIL YOU POWER OFF YOUR SYSTEM OR THE REMOTE SYSTEM DROPS ITS CARRIER. ╘O HANG UP, SEE ┴╠╘-┴ COMMAND. -------------------------------------------------------------------- [ALT] <├╥╙╥-╒╨/─╧╫╬> ╙ELECT CURSOR TYPE. ╘HIS COMMAND WILL SEQUENCE THROUGH VARIOUS CURSOR TYPES, INCLUDING BLINKING & NONBLINKING BLOCKS AND UNDERSCORES. ╘HEY CURSOR TYPE IN USE WILL BE SAVED WHEN THE OPTIONS ARE SAVED (┴╠╘-╧). -------------------------------------------------------------------- [ALT] <┼╬╟╠╔╙╚ ╨╧╒╬─> ┴UTOWRAP MODE TOGGLE. ╬ORMALLY AUTOWRAP MODE IS CONTROLLED BY THE HOST VIA ESCAPE SEQUENCES. ╙OMETIMES IT IS NOT. ╘HIS COMMAND WILL ALLOW YOU TO READ LINES LONGER THAN THE SCREEN IS WIDE BY ALLOWING THE TEXT TO WRAP TO THE NEXT LINE. ╫HEN ╧╬, THE '╫' INDICATOR WILL APPEAR ON THE STATUS LINE. ╘HE AUTOWRAP STATE IN USE WILL BE SAVED WHEN THE OPTIONS ARE SAVED (┴╠╘-╧). -------------------------------------------------------------------- [ALT] <┼╬╘┼╥> ╥ESET TERMINAL. ╘HIS COMMAND RESETS THE TERMINAL PROGRAM FROM THE BEGINNING, RELOADING THE ╘┼╠╙┼╘ AND ╧╨╘╙┼╘ FILES FROM THE CURRENTLY SELECTED DISK DRIVE (IF AVAILABLE, OTHERWISE THE CURRENT OPTIONS WILL BE USED). ╘HE MEMORY BUFFER WILL BE PRESERVED. ╔F THE OPTIONS FILE IS AVAILABLE, NOTE THAT THE MODEM PARAMETERS MAY CHANGE IF THE OPTION FILE PARAMETERS DIFFER FROM THE CURRENT CONFIGURATION IN THIS REGARD. ╘HE MODEM IS ╬╧╘ HUNG UP AND THE CARRIER IS MAINTAINED. ┘OUR TERMINAL CAN BE RESET BY THE REMOTE COMPUTER VIA ╓╘100 ESCAPE SEQUENCES. -------------------------------------------------------------------- [ALT] <╥┼╘╒╥╬> ╥ETURN MODE TOGGLE. ╘HIS COMMAND TOGGLES THE INTERPRETATION OF <├╥> BETWEEN <├╥>-ONLY AND <├╥><╠╞> (NEWLINE) WHEN RECIEVED FROM THE REMOTE COMPUTER. ╘HIS IS NORMALLY NOT REQUIRED, BUT SOME ├OMMODORE-BASED ┬┬╙'S OCCASIONALLY TRANSMIT <├╥>'S ONLY. ╫HEN ╧╬, THE '╥' INDICATOR APPEARS ON THE STATUS LINE. ╘HIS OPTION IS SAVED WHEN OPTIONS ARE SAVED (┴╠╘-╧). -------------------------------------------------------------------- [ALT] <+/-> ╞LOW ├ONTROL TOGGLE. ╞LOW CONTROL IS NORMALLY ENABLED (┴╠╘+), WHICH ALLOWS TRANSMISSION OF ├╘╠-╙ (╪╧╞╞) AND ├╘╠-╤ (╪╧╬) CHARACTERS WHEN, FOR EXAMPLE, YOU SELECT A ╚┼╠╨ OR ─╧╙ SCREEN OR PRESS <NO_SCROLL>. ─ISABLING FLOW CONTROL (┴╠╘-) MEANS YOU WILL LIKELY LOSE DATA WHEN YOU SELECT ONE OF THESE SCREENS WHILE THE RECEIVER IS ACTIVE. ╫HEN TOGGLED, A MESSAGE APPEARS ON THE STATUS LINE INDICATING THE CURRENT STATE. ╫HEN THE TERMINAL IS IN AN ╪╧╞╞ STATE (CAUSED BY EITHER AN ╪╧╞╞ (^╙) RECEIVED FROM THE REMOTE OR AN ╪╧╞╞ IS TRANSMITTED BY ╓╘100-128) AND FLOW CONTROL IS ENABLED, THE '╪' INDICATOR APPEARS ON THE STATUS LINE. ╫HEN ╧╞╞, THE <NO_SCROLL> KEY HAS NO EFFECT ONLY WHEN USED ON THE COMMUNICATIONS SCREEN. ╘HE STATE OF FLOW CONTROL IS SAVED WHEN YOU SAVE THE TRANSLATION TABLES (┴╠╘*). ╬OTE THAT TURNING FLOW CONTROL OFF WHILE THE REMOTE IS IN AN ╪╧╞╞ STATE ('╪' APPEARS ON THE STATUS LINE) MEANS YOU WILL NOT BE ABLE TO RESUME NORMAL COMMUNICATIONS UNTIL YOU RE-ENABLE FLOW CONTROL. -------------------------------------------------------------------- [ALT] * ═ODIFY ┴╙├╔╔ TRANSLATION TABLES. ╘HE ┴╙├╔╔-╨┼╘╙├╔╔ TRANSLATION TABLES, ONE FOR INPUT AND ONE FOR OUTPUT, CAN BE MODIFIED. ╙ELECT WHICH TABLE BY PRESSING '╥'ECEIVE (INPUT) OR '╘'RANSMIT (OUTPUT) WHEN PROMPTED. ╙ELECT THE CODE TO CHANGE BY PRESSING THE KEY ASSOCIATED WITH THAT CODE, THEN SELECT THE NEW VALUE BY PRESSING THE KEY ASSOCIATED WITH THAT CODE. ╨RESS <STOP> TO EXIT, AT WHICH TIME YOU CAN CHOOSE TO PERMANENTLY SAVE THE MODIFIED TABLES BY ANSWERING '┘'ES WHEN PROMPTED (USES CURRENTLY SELECTED DISK DRIVE, AND DISPLAYS DISK ERROR MESSAGES). ╘HE STAND-ALONE PROGRAM ├╚┴╬╟┼.═╘╙ MAY BE MORE CONVIENIENT OR PRACTICAL TO USE FOR CHANGING THE TRANSLATION TABLES, DEPENDING UPON THE EXTENT OF THE CHANGES YOU WANT TO MAKE. ╬ORMALLY, MODIFYING THE TRANSLATION TABLES IS NOT NECESSARY. ╧FTEN THIS IS DONE TO CHANGE THE CODE A CERTAIN KEY GENERATES. ╙OME (CODES) CANNOT BE CHANGED, SUCH AS ┬╥┼┴╦, ╙╚╔╞╘, ├╧╬╘╥╧╠, AND <STOP>. ╫HEN YOU CHANGE A KEY (SUCH AS ╘┴┬ FOR EXAMPLE) NOTE THAT WHAT YOU HAVE ACTUALLY DONE IS CHANGE THE CONTROL CODE FOR ╘┴┬ (^╔, ┴╙├╔╔ $09) TO SOMETHING ELSE, SUCH THAT PRESSING ├╘╥╠-╔ WILL ALSO BE CHANGED. ╙EE ┴╠╘<DELETE> FOR CHANGING THE CODE ASSOCIATED WITH THE DELETE KEY. ╘O RESTORE THE DEFAULT VALUE TO A PREVIOUSLY MODIFIED ├╘╥╠ KEY, PRESS THAT KEY TWICE. ╥ESTORING THE DEFAULT VALUE OF OTHER KEYS MAY NOT BE POSSIBLE, REQUIRING THE DEFAULT TRANSLATION TABLES TO BE RE-LOADED (PUT THE PROGRAM DISK INTO THE CURRENT DRIVE AND PRESS ┴╠╘<ENTER> TO RESET ╓╘100-128). ╘HE TRANSLATION TABLES ARE CONTAINED IN A FILE NAMED ┴╙├╔╔.═╘╙, WHICH IS LOADED INTO ├128 MEMORY ($┼00-$╞╞╞). ┼XPERT USERS MAY WISH TO MODIFY THIS FILE DIRECTLY BEFORE RUNNING ╓╘100-128 USING THE ├128'S BUILT-IN ═╧╬╔╘╧╥ COMMAND. -------------------------------------------------------------------- [ALT] / ─ISPLAY ╓╘100-128 VERSION. ╘HIS COMMAND DISPLAYS THE PROGRAM'S RELEASE VERSION ON THE STATUS LINE. -------------------------------------------------------------------- [ALT] <─┼╠┼╘┼> ╙ELECT ─┼╠┼╘┼ KEY OPERATION. ╘HE "DELETE CHARACTER" FUNCTION IS IMPLEMENTED IN A VARIETY OF WAYS ON VARIOUS COMPUTER SYSTEMS. ╒SE THIS COMMAND TO SELECT THE IMPLEMENTATION THAT IS COMPATIBLE WITH THE SYSTEM YOU ARE USING. ╘HERE ARE THREE MODES SUPPORTED: MODE PROMPT XMIT RECEIVE ------------------------- ----------- ---- ---------------- ┴╬╙╔-DELETE ─┼╠=$7╞ $7╞ $9─ (CRSR LEFT) ╬ON-DESTRUCTIVE BACKSPACE ─┼╠=┬╙ ╧╬╠┘ $08 $9─ (CRSR LEFT) DESTRUCTIVE BACKSPACE ─┼╠=┬╙ & ┼╥┴╙┼ $08 $20 (├┬═ DELETE) ╨RESS ┴╠╘-─┼╠┼╘┼ UNTIL THE IMPLEMENTATION YOU REQUIRE IS DISPLAYED ON THE STATUS LINE. ╘HE SELECTION IS SAVED WHENEVER THE OPTIONS ARE SAVED (┴╠╘-╧) AND LOADED WHENEVER THE OPTIONS ARE LOADED (┴╠╘-╬). -------------------------------------------------------------------- [ALT] <┬┴├╦┴╥╥╧╫> ═AKE A ┬ACKUP COPY OF ╓╘100-128. ╘HIS BUILT-IN UTILITY WILL COPY THE ╓╘100-128 PROGRAM TO DISK, INCLUDING ALL CURRENTLY SELECTED OPTIONS, TRANSLATION TABLES, AND CHARACTER DEFINITIONS. ┘OU MUST PREPARE A NEW DISK BEFOREHAND (SEE ┴╠╘-╫). ╘HE ╚┼╠╨ FILES MUST BE COPIED SEPARATELY BY YOU (USE ┴╠╘-╞ TO LOAD EACH ONE INTO THE MEMORY BUFFER, AND ┴╠╘-─ TO SAVE IT TO DISK). ┴ BRIEF EXPLANATORY MESSAGE IS DISPLAYED, AND YOU ARE GIVEN THE OPTION TO CONTINUE. ╨RESS '┘'ES TO MAKE A BACKUP, '╬'O OR ╙╘╧╨ TO EXIT. ┴S EACH FILE IS CREATED, A MESSAGE IS DISPLAYED ALONG WITH THE ASSOCIATED DISK ERROR MESSAGE. ╘HE DRIVE USED IS THE CURRENTLY SELECTED DRIVE (├=╧). ╘HE FILES COPIED ARE: ╓╘100-128 ╘HE MAIN PROGRAM FILE. ╧╨╘╙┼╘.═╘╙ ╘HE OPTIONS FILE. ╘┼╠╙┼╘.═╘╙ ╘HE CHARACTER DEFINITIONS. ┴╙├╔╔.═╘╙ ╘HE ┴╙├╔╔-╨┼╘╙├╔╔ TRANSLATION TABLES. -------------------------------------------------------------------- [ALT] <╒╨┴╥╥╧╫> ╥ECOVER CLEARED MEMORY BUFFER. ┴N ACCIDENTALLY CLEARED MEMORY BUFFER CAN BE RECOVERED, ASSUMING NO OTHER BUFFER OPERATIONS HAVE BEEN PERFORMED SINCE IT WAS LAST CLEARED. ╨RESS '┘'ES TO CONFIRM THE REQUEST, OR '╬'O TO EXIT. ╔F THE BUFFER CANNOT BE RECOVERED, A MESSAGE IS DISPLAYED ON THE STATUS LINE. ╔F OTHER BUFFER OPERATIONS HAVE OCCURRED (SUCH AS ┴╠╘-├), THE PREVIOUS BUFFER POINTERS ARE RESTORED BUT THE BUFFER CONTENTS ARE UNAFFECTED. ╘HIS ALLOWS YOU TO POSSIBLY RECOVER SOME OF THE PREVIOUS CONTENTS. -------------------------------------------------------------------- [├=] ╧ ╧PTION SETUP MODE. ╧PTION SETUP MODE DISPLAYS VARIOUS OPTIONS, SUCH AS SCREEN COLORS, DISK UNIT NUMBER, PRINTER PARAMETERS, AND THE ANSWERBACK MESSAGE, AND ALLOWS THE USER TO CHANGE THESE OPTIONS. ╨RESS THE <ENTER> KEY TO MOVE THE CURSOR TO THE OPTION YOU WANT TO CHANGE, ENTER THE APPROPRIATE DATA, AND PRESS <ENTER> TO MAKE THE CHANGE EFFECTIVE. ┼XIT OPTION MODE BY PRESSING <STOP>. ╠IMITED ERROR CHECKING IS PERFORMED. ╧PTIONS CAN BE SAVE USING THE ┴╠╘-╧ COMMAND. ╨REVIOUSLY SAVED OPTIONS CAN BE LOADED USING THE ┴╠╘-╬ COMMAND. ═ANY OTHER OPTIONS ARE SET USING SPECIFIC ┴╠╘ AND ├= KEY COMMANDS, AND ARE NOT SELECTABLE IN OPTION MODE ALTHOUGH THEY TOO WILL BE SAVED AND LOADED VIA ┴╠╘-╧/╬. ├OLORS: ┼NTER A DECIMAL NUMBER IN THE RANGE (0-15). ╘HE NUMBERS FOR EACH COLOR ARE: 0 BLACK 4 LT.PURPLE 8 PURPLE 12 MED.GRAY 1 WHITE 5 GREEN 9 BROWN 13 LT.GREEN 2 RED 6 BLUE 10 LT.RED 14 LT.BLUE 3 LT.CYAN 7 YELLOW 11 CYAN 15 LT.GRAY ╙PECIAL ATTRIBUTES (SUCH AS BLINK) ARE SELECTED BY THE HOST COMPUTER VIA ESCAPE SEQUENCES. ├OLOR CHANGES WILL BECOME EFFECTIVE UPON EXITING THE OPTIONS MODE. ╘HE CHANGES WILL NOT AFFECT DATA ALREADY DISPLAYED. ╙PECIAL ATTRIBUTE MODES (SUCH A BLINK AND UNDERSCORE) IN EFFECT WHEN OPTIONS MODE WAS ENTERED WILL REMAIN IN EFFECT WHEN IT IS EXITED (EXCEPT BOLD). ─ISK UNIT: 4-30 (DISKS ARE NORMALLY 8-11) ═ODEMS: 0 1660 ╓╔├ MODEM (AND OTHER DUMB MODEMS) 1 1650 ┴UTOMODEM 2 1660 ═ODEM/300 (WITH CARRIER DETECT) 3 1660 ═ODEM/300 (WITHOUT CARRIER DETECT) 4 1670 ═ODEM/1200 (AND OTHER ╚AYES COMPATIBLE OR DIRECT CONNECTIONS (NULL MODEMS)) ╨RINTER ├MD (SECONDARY ADDRESS): ├OMMODORE PRINTERS OFFER SEVERAL PRINT MODES SELECTED BY THE SECONDARY ADDRESS. ╬ORMALLY THIS IS SET TO 7 TO ENABLE UPPER/ LOWER CASE PRINTING. ╨ROMPT: ╘HE UPLOAD PROMPT IS THE CHARACTER WHICH IS USED TO PROMPT ╓╘100-128 TO SEND THE NEXT LINE OF DATA DURING AN UPLOAD (SEE ┴╠╘-╒ COMMAND). ╬ORMALLY THIS IS THE LINE TERMINATOR, <RETURN>, WHICH IS DISPLAYED AS A CHECK MARK. ╘O DISABLE THIS MECHANISM, PRESS <ESCAPE> TO MAKE THE PROMPT NULL (DISPLAYED AS A REVERSE FIELD '@'). ╚OLDOFF: ╘HIS IS THE GUARD TIME (DELAY) IMPOSED BY ╓╘100-128 DURING PRINTER OPERATIONS FOLLOWING A <RETURN> CHARACTER, MEASURED IN 60THS OF A SECOND. ╔F PRINTOUTS START DROPPING CHARACTERS, INCREASE THIS VALUE. ╬ORMALLY, THIS VALUE IS 15 (1/4 SECOND). ├╘╥╠-┼: ╘HE ANSWER-BACK MESSAGE IS A PRE-STORED STRING OF CHARACTERS WHICH A TERMINAL TRANSMITS IN RESPONSE TO A ^┼ (┴╙├╔╔ $05) SENT BY THE HOST. ╘HIS IS ALSO THE STRING OF CHARACTERS ╓╘100-128 TRANSMITS WHEN ├╘╥╠-┬╥┼┴╦ IS PRESSED. ╘O ENABLE THIS FEATURE, ENTER '┘'ES AT THE PROMPT AND ENTER THE STRING. ├ONTROL CODES ARE REPRESENTED BY REVERSE FIELD CHARACTERS, AND <RETURN> BY A CHECK MARK. ╒SE THE <ENTER> KEY TO END INPUT. -------------------------------------------------------------------- [├=] <┼╙├┴╨┼> ╟RAPHICS MODE ENABLE/DISABLE TOGGLE. ╘HIS COMMAND DISABLES THE ALTERNATE (GRAPHICS) ╓╘100 CHARACTER SET. ╧CCASIONALLY SPURIOUS <├╘╠>╬ AND <├╘╠>╧ CHARACTERS WILL CAUSE GRAPHICS MODE TO BE SELECTED, AND YOU CAN DISABLE THIS FEATURE VIA <├=><┼╙├>. ╬OTE THAT EXISTING GRAPHICS ON THE SCREEN WILL NOT BE CONVERTED TO TEXT, BUT FUTURE CHARACTERS WILL BE. ┴ MESSAGE APPEARS ON THE STATUS LINE TO INDICATE THE CURRENT STATE. ╘HIS OPTION WILL BE SAVED OR LOADED WHEN OTHER OPTIONS ARE SAVED OR LOADED. -------------------------------------------------------------------- <╚┼╠╨> ╚ELP SCREENS ╘HERE ARE FOUR HELP SCREENS AVAILABLE FOR DISPLAY WHEN THE PROGRAM DISK IS ACCESSIBLE ON THE CURRENTLY SELECTED DRIVE. ╙ELECT A NUMBER FROM 1 THROUGH 4 TO VIEW THEM, OR PRESS ╙╘╧╨ TO RETURN TO THE COMMUNICATIONS SCREEN. ╘HE HELP SCREENS AVAILABLE ARE: (1) ├OMMAND SUMMARY. ┴ BRIEF DESCRIPTION OF THE VARIOUS ┴╠╘, ├=, AND OTHER KEY SEQUENCES AVAILABLE. (2) ╪═╧─┼═ PROTOCOL. ┬RIEFLY DESCRIBES HOW TO USE THE ╪═╧─┼═ FILE TRANSFER UTILITY. (3) ┴UTODIAL, AUTOANSWER MODEM OPERATIONS. (4) ╚INTS AND TIPS PERTAINING TO THIS PROGRAM. ╘HE SCREENS CAN BE PRINTED (┴╠╘-╙), OR THE FILES COPIED INTO THE MEMORY BUFFER AND VIEWED ANYTIME (┴╠╘-─). ╘HE FOUR HELP FILES ARE NAMED ╓╘100X.╚╠╨, WHERE X=┴,┬,├,─. -------------------------------------------------------------------- <╠╔╬┼╞┼┼─> ┬╥┼┴╦ KEY. ╘HE NORMAL ├128 IMPLEMENTATION OF THIS KEY IS NOT USED; INSTEAD THIS KEY SERVES AS A ╓╘100 ┬╥┼┴╦ KEY. ╨RESSING THIS KEY CAUSES A SINGLE, APPROXIMATELY 300MS ┬╥┼┴╦ SIGNAL TO BE GENERATED. ╘HE STATUS LINE WILL DISPLAY {┬╥┼┴╦}. ╨RESSING ├╘╥╠-┬╥┼┴╦ (^┬╥┼┴╦) WILL SEND THE ╓╘100 ANSWER-BACK MESSAGE, IF ENABLED (ENABLE & SPECIFY CHARACTER STRING ON THE OPTIONS SCREEN, ├=╧). -------------------------------------------------------------------- <╬╧-╙├╥╧╠╠> ╨AUSE DISPLAY, FLOW CONTROL. ╫HEN VIEWING THE ╓╘100 COMMUNICATIONS SCREEN, THIS KEY WILL ALTERNATELY TRANSMIT ╪╧╞╞ (^╙) AND ╪╧╬ (^╤) CHARACTERS IF FLOW CONTROL IS ENABLED (SEE ┴╠╘ +/-). ╫HEN VIEWING OTHER SCREENS, THIS KEY WILL PAUSE THE DISPLAY UNTIL IT IS PRESSED AGAIN, BUT NOTHING WILL BE TRANSMITTED TO THE REMOTE SYSTEM. -------------------------------------------------------------------- <╙╘╧╨> ╫HEN VIEWING THE ╓╘100 COMMUNICATIONS SCREEN, THE ╙╘╧╨ KEY WILL CAUSE A ├╘╥╠-├ (^├, ┴╙├╔╔ $03) CODE TO BE TRANSMITTED, UNLESS SPLIT-SCREEN MODE (┴╠╘-╚) IS ACTIVE, IN WHICH CASE IT EXITS THAT MODE. ╧N ANY OTHER SCREEN OR MODE, IT IS OFTEN USED TO EXIT A MODE OR CANCEL A SELECTION. -------------------------------------------------------------------- ├╒╥╙╧╥ KEYS. ╘HE TWO LOWER ├╥╙╥-╒╨/─╧╫╬ AND ├╥╙╥-╠┼╞╘/╥╔╟╚╘ ON THE MAIN ├128 KEYBOARD GENERATE THE USUAL ├┬═ CURSOR CODES. ╘HE FOUR UPPER CURSOR ARROW KEYS GENERATE THE ┴╬╙╔ ╓╘100 ESCAPE SEQUENCES, WHICH ARE TRANSMITTED TO THE HOST COMPUTER. ╫HEN THE HOST SENDS THESE CODES BACK, THE CORRESPONDING CURSOR ACTION OCCURS. ╘HE CODES GENERATED ARE DEPENDENT UPON THE CURSOR KEY APPLICATION MODE ( <┼╙├>[?1 ) SET BY THE HOST COMPUTER. ╓╘100-128 DEFAULTS CURSOR KEY MODE RESET: ├URSOR ├URSOR MODE RESET ├URSOR MODE SET --------- ----------------- ----------------- UP <ESC>[┴ <ESC>╧┴ DOWN <ESC>[┬ <ESC>╧┬ RIGHT <ESC>[├ <ESC>╧├ LEFT <ESC>[─ <ESC>╧─ -------------------------------------------------------------------- ╬UMERIC ╦┼┘╨┴─ AND ╞UNCTION ╦EYS. ╘HE ├128 NUMERIC KEYPAD GENERATES CODES ASSOCIATED WITH THE KEY LEGENDS, WITH THE ┼╬╘┼╥ KEY GENERATING THE SAME CODE AS A ╥┼╘╒╥╬ KEY. ╘O DISTINGUISH BETWEEN THE NUMERIC KEYPAD KEYS AND THE MAIN KEYBOARD, A HOST COMPUTER CAN PLACE ╓╘100-128 INTO ╦EYPAD ┴PPLICATION MODE USING AN ESCAPE SEQUENCE (┼╙├= OR ┼╙├>). ╓╘100-128 DEFAULTS TO KEYPAD MODE RESET. ╘HE KEYPAD GENERATES THE FOLLOWING CODES FOR EACH MODE: ╦EYPAD KEY ╦EYPAD MODE RESET ╦EYPAD MODE SET ---------- ----------------- ----------------- 0 0 <ESC>╧P 1 1 <ESC>╧Q 2 2 <ESC>╧R 3 3 <ESC>╧S 4 4 <ESC>╧T 5 5 <ESC>╧U 6 6 <ESC>╧V 7 7 <ESC>╧W 8 8 <ESC>╧X 9 9 <ESC>╧Y ╨╞1 (╞1) <ESC>╧╨ <ESC>╧╨ ╨╞2 (╞3) <ESC>╧╤ <ESC>╧╤ ╨╞3 (╞5) <ESC>╧╥ <ESC>╧╥ ╨╞4 (╞7) <ESC>╧╙ <ESC>╧╙ + + <ESC>╧M - - <ESC>╧L . . <ESC>╧N ┼╬╘┼╥ ┼╬╘┼╥ <ESC>╧═ ╘HE FUNCTION KEYS ARE PRE-DEFINED, BUT MAY BE MODIFIED BY THE USER (SEE THE ┴╠╘-╦ COMMAND). ╔F ╦EYPAD APPLICATION MODE IS SET, THE NORMAL KEYPAD CODES CAN BE GENERATED BY PRESSING THE ┴╠╘ KEY SIMULTANEOUSLY WITH THE PARTICULAR KEYPAD KEY DESIRED, ALTHOUGH THIS IS NOT NORMALLY NECESSARY. ô ╓╘100-128 VERSION 2.1 ╙UPPORTED ┼SCAPE ╙EQUENCES ----------------------------------------------------------------- <ESC>7 SAVE CURSOR POSITION & ATR. <ESC>8 RESTORE CURSOR POSITION & ATR. <ESC>─ MOVE CURSOR DOWN ONE LINE <ESC>┼ MOVE CURSOR TO START OF NEXT LINE <ESC>╚ SET ╘┴┬ STOP <ESC>═ MOVE CURSOR UP ONE LINE <ESC>┌ REPORT TERMINAL TYPE (NON-STANDARD ┴╬╙╔) <ESC>C RESET TERMINAL TO DEFAULT STATE <ESC>[*@ INSERT CHARACTER <ESC>[*┴ MOVE CURSOR UP <ESC>[*┬ MOVE CURSOR DOWN <ESC>[*├ MOVE CURSOR RIGHT <ESC>[*─ MOVE CURSOR LEFT <ESC>[*╟ POSITION CURSOR HORIZONTALLY <ESC>[*;*╚ POSITION CURSOR <ESC>[╩ CLEAR FROM CURSOR TO ┼╧╙ <ESC>[1╩ CLEAR FROM CURSOR TO ┬╧╙ <ESC>[2╩ ERASE ENTIRE DISPLAY <ESC>[╦ CLEAR FROM CURSOR TO ┼╧╠ <ESC>[1╦ CLEAR FROM CURSOR TO ┬╧╠ <ESC>[2╦ ERASE ENTIRE LINE <ESC>[*╠ INSERT LINE <ESC>[*═ DELETE LINE <ESC>[*╨ DELETE CHARACTER <ESC>[C REPORT TERMINAL TYPE. RESPONSE IS <ESC>[?1;11C <ESC>[*;*F POSITION CURSOR <ESC>[G CLEAR ╘┴┬ STOP <ESC>[3G CLEAR ALL ╘┴┬ STOPS <ESC>[>5G SET ╘┴┬S EVERY 8 COLUMNS <ESC>[I PRINT SCREEN <ESC>[*M SET CHARACTER ATTRIBUTES <ESC>[*Q ╠┼─ CONTROL <ESC>[R RESET SCROLL REGION <ESC>[*;*R SET SCROLL REGION <ESC>[*V SET CURSOR ATTRIBUTES <ESC>[4H SET INSERT MODE <ESC>[4L SET REPLACE MODE <ESC>[12H SET FULL DUPLEX MODE <ESC>[12L SET HALF DUPLEX MODE <ESC>[20L SET ╠╞ MODE <ESC>[20H SET ╬╠ MODE <ESC>[5N REPORT TERMINAL STATUS. RESPONSE IS <ESC>[0N <ESC>[6N REPORT CURSOR LOCATION. RESPONSE IS <ESC>*;*╥ ô ╓╘100-128 VERSION 2.1 ╙UPPORTED ┼SCAPE ╙EQUENCES (CONTINUED) ----------------------------------------------------------------- <ESC>[?1H SET CURSOR KEY APPLICATION MODE <ESC>[?1L RESET CURSOR KEY APPLICATION MODE <ESC>[?2L SET ╓╘52 MODE (NOT CURRENTLY IMPLEMENTED) <ESC>[?5H REVERSE SCREEN <ESC>[?5L NORMAL SCREEN <ESC>[?6H SET ORIGIN MODE <ESC>[?6L RESET ORIGIN MODE <ESC>[?7H SET AUTOWRAP MODE <ESC>[?7L RESET AUTOWRAP MODE <ESC>[?8H SET AUTO REPEAT <ESC>[?8L RESET AUTO REPEAT <ESC>= SET KEYPAD APPLICATION MODE <ESC>> SET KEYPAD NUMERIC MODE <ESC>< SET ┴╬╙╔ MODE <ESC>#8 FILL SCREEN WITH ┼'S <ESC>(┬ ASSIGN ╟0 ┴╙├╔╔ CHARACTER SET <ESC>(0 ASSIGN ╟0 GRAPHIC CHARACTER SET <ESC>(2 ASSIGN ╟0 SPECIAL CHARACTER SET NOTE: THE ╟0 CHARACTER SET IS SELECTED BY <CTL>╧ <ESC>)┬ ASSIGN ╟1 ┴╙├╔╔ CHARACTER SET <ESC>)0 ASSIGN ╟1 GRAPHIC CHARACTER SET <ESC>)2 ASSIGN ╟1 SPECIAL CHARACTER SET NOTE: THE ╟1 CHARACTER SET IS SELECTED BY <CTL>╬ ô ╓╘100-128 VERSION 2.1 ─ECLARING THE ╓╘100 ╘ERMINAL ----------------------------------------------------------------- ╔T MAY BE NECESSARY TO INFORM THE HOST SYSTEM WHAT TERMINAL YOU ARE USING. ╔F YOU HAVE DIFFICULTY IN THIS MATTER, YOU MAY HAVE TO CONTACT A ╙┘╙╧╨ OR OTHER COMPUTER OPERATOR OF THE SYSTEM WITH WHICH YOU ARE TRYING TO CONNECT. ╘HE FOLLOW PROCEDURES ARE FAIRLY STANDARD: ╒╬╔╪ SYSTEMS, ─┼├ ╒LTRIX-32: SETENV ╘┼╥═ VT100 ╓┴╪ ╓═╙ SYSTEMS: SET TERM/DEV=VT100 ╘╧╨-20 SYSTEMS: TERM VT100 ├OMPU╙ERVE: GO DEFALT (SPELLED IT INCORRECTLY) 2 (SELECT TERMINAL TYPE) 2 (SELECT ┴╬╙╔/╓╘100) ╒╬╔╪ IS A TRADEMARK OF ┴╘&╘ ┬ELL ╠ABORATORIES ─┼├, ╓┴╪, ╓═╙, ╒LTRIX-32 ARE TRADEMARKS OF ─IGITAL ┼QUIPMENT ├ORPORATION ô ╓╘100-128 VERSION 2.1 ╒SE WITH THE ├OMMODORE 17XX ╥┴═DISK ----------------------------------------------------------------- ╘HIS VERSION OF THE ╓╘100-128 TERMINAL EMULATOR IS COMPATIBLE WITH THE ├OMMODORE ╥┴═DISK SOFTWARE (VERSION 4.3 OR HIGHER) WHICH REQUIRES ONE OF THE ├128-COMPATIBLE ╥┴═ ┼XPANSION ╒NITS (1700 OR 1750). ╘HE ╥┴═DISK MUST BE PROPERLY INSTALLED BEFORE THE ╓╘100-128 TERMINAL EMULATOR SOFTWARE IS LOADED AND RUN. ╫HEN YOU INSTALL THE ╥┴═DISK, SPECIFY PAGE 8 AS THE INTERFACE PAGE. ├OPY TO THE ╥┴═DISK ANY FILES (INCLUDING ╓╘100-128 ╚ELP FILES, ETC.) YOU WILL NEED, THEN LOAD AND RUN ╓╘100-128. ╥EMEMBER TO SELECT THE DEFAULT DRIVE FROM THE ╓╘100-128 OPTIONS SCREEN (┴╠╘-╧). ╫HENEVER A DISK OPERATION IS PERFORMED, AN ╪╧╞╞ IS AUTOMATICALLY PERFORMED TO PREVENT THE LOSS OF DATA SHOULD THERE BE A TRANSMISSION (╬═╔) DURING THE ╥┴═DISK TRANSFER (─═┴). ╞LOW CONTROL MUST BE ENABLED FOR THIS TO BE EFFECTIVE.